Overview

GlowPaint is a transparent water-based wall paint that transforms walls and materials into glowing objects in the dark. Use for fun or function; create glow-up murals for a children's bedroom, paint on walls or ceilings for party nights, create glow-in-the-dark Halloween signs or use to highlight exits or stairs in case of power outages. GlowPaint can be painted over the top of any colour emulsion and will glow when the lights go down.

Water-Based Glow-in-the-dark paint
Quick and easy to apply
Emission-free, no nasty odours and safe to use indoors
With 30 minutes of lighting, the paint is visible in the dark for 25 hours

Area	Interior
Recommended Use	Ideal for Children's Bedrooms, Walls, Ceilings and Furniture
Base	Water-Based
Coverage	Up to 30m² per litre
Drying Time	1 hour
Re-Coat Time	1 hour
Recommended Coats	4 Coats
Application Method	Brush, Roller or Spray
VOC Levels	Low
Clean Up	Clean your equipment with water directly after use.

Preparation

The surface should be solid, clean, dry, and free of grease, dust and rust.

Remove loose coats of paint and clean old coats of paint with a paint cleaner.

Fill up any cracks and holes with a suitable filler and lightly sand the surface.

Remove any fat, dirt and dust present with water and ammonia. If possible, sponge it with clean water and let it dry well.

Wallpaper to be painted must be firmly attached. GlowPaint can be applied directly to wood and stone surfaces.

For other surfaces, a suitable primer is advised.

Application

We recommend always following the manufacturer's instructions found on the tin. It is recommended that a small test area is applied before treating the entire surface to ensure compatibility.

Ensure product is thoroughly stirred before and during application.
GlowPaint can be painted on top of any emulsion however use a white primer under the GlowPaint for optimum clarity.
GlowPaint is quick and easy to apply. Use a long or short-haired roller for large surfaces, smaller shapes can be applied with a brush. On larger surfaces, the undiluted paint can be applied using Wagner XVLP spray technology.
Four layers are advised for the best brightness, but you can adjust the brightness yourself by alternating with the number of GlowPaint layers or by applying a difference in light and dark on the substrate.
Another layer of GlowPaint can be applied within 1 hour depending on the temperature and humidity.
Wrap your roller or brush in household foil during the drying break.

Note: GlowPaint charges in approximately 40 seconds under direct sunlight or 1-30 minutes under daylight, UV and white light. The afterglow can be more than 25 hours until it is completely invisible. The first 15 minutes, the Afterglow is most intense.